logo

SCIENTIA SINICA Informationis, Volume 48 , Issue 6 : 713-723(2018) https://doi.org/10.1360/N112018-00019

Mechanical model of electromagnetic-assisted transfer-printing stamp containing a four-prism cavity

More info
  • ReceivedJan 20, 2018
  • AcceptedApr 13, 2018
  • PublishedJun 4, 2018

Abstract


Funded by

国家自然科学基金(11272260)


References

[1] Carlson A, Bowen A M, Huang Y. Transfer printing techniques for materials assembly and micro/nanodevice fabrication. Adv Mater, 2012, 24: 5284-5318 CrossRef PubMed Google Scholar

[2] Khang D Y, Jiang H Q, Huang Y. A stretchable form of single-crystal silicon for high-performance electronics on rubber substrates. Science, 2006, 311: 208-212 CrossRef PubMed ADS Google Scholar

[3] Sheng X, Robert C, Wang S. Transfer printing of fully formed thin-film microscale GaAs lasers on silicon with a thermally conductive interface material. Laser Photonics Rev, 2015, 9: 17-22 CrossRef Google Scholar

[4] Yoon J, Baca A J, Park S I. Ultrathin silicon solar microcells for semitransparent, mechanically flexible and microconcentrator module designs. Nat Mater, 2008, 7: 907-915 CrossRef PubMed ADS Google Scholar

[5] Ning H, Krueger N A, Sheng X. Transfer-printing of tunable porous silicon microcavities with embedded emitters. ACS Photonics, 2014, 1: 1144-1150 CrossRef Google Scholar

[6] Kim T I, Hyun Lee S H, Li Y H. Temperature- and size-dependent characteristics in ultrathin inorganic light-emitting diodes assembled by transfer printing. Appl Phys Lett, 2014, 104: 051901 CrossRef ADS Google Scholar

[7] Jung I W, Xiao J L, Malyarchuk V. From the cover: dynamically tunable hemispherical electronic eye camera system with adjustable zoom capability. Proc Natl Acad Sci USA, 2011, 108: 1788-1793 CrossRef PubMed ADS Google Scholar

[8] Feng X, Meitl M A, Bowen A M. Competing fracture in kinetically controlled transfer printing. Langmuir, 2007, 23: 12555-12560 CrossRef PubMed Google Scholar

[9] Sim K, Chen S, Li Y H. High fidelity tape transfer printing based on chemically induced adhesive strength modulation. Sci Rep, 2015, 5: 16133 CrossRef PubMed ADS Google Scholar

[10] Kim N, Kang H, Lee J H. Highly conductive all-plastic electrodes fabricated using a novel chemically controlled transfer-printing method. Adv Mater, 2015, 27: 2317-2323 CrossRef PubMed Google Scholar

[11] Meitl M A, Zhu Z T, Kumar V. Transfer printing by kinetic control of adhesion to an elastomeric stamp. Nat Mater, 2006, 5: 33-38 CrossRef ADS Google Scholar

[12] Kim S, Wu J A, Carlson A. Microstructured elastomeric surfaces with reversible adhesion and examples of their use in deterministic assembly by transfer printing. Proc Natl Acad Sci USA, 2010, 107: 17095-17100 CrossRef PubMed ADS Google Scholar

[13] Wu J, Kim S, Chen W Q. Mechanics of reversible adhesion. Soft Matter, 2011, 7: 8657-8662 CrossRef ADS Google Scholar

[14] Carlson A, Kim-Lee H J, Wu J. Shear-enhanced adhesiveless transfer printing for use in deterministic materials assembly. Appl Phys Lett, 2011, 98: 264104 CrossRef ADS Google Scholar

[15] Kim T H, Carlson A, Ahn J H. Kinetically controlled, adhesiveless transfer printing using microstructured stamps. Appl Phys Lett, 2009, 94: 113502 CrossRef ADS Google Scholar

[16] Carlson A, Wang S D, Elvikis P. Active, programmable elastomeric surfaces with tunable adhesion for deterministic assembly by transfer printing. Adv Funct Mater, 2012, 22: 4476-4484 CrossRef Google Scholar

[17] Li R, Li Y H, Lü C F. Thermo-mechanical modeling of laser-driven non-contact transfer printing: two-dimensional analysis. Soft Matter, 2012, 8: 7122-7127 CrossRef ADS Google Scholar

[18] Xue Y G, Zhang Y H, Feng X. A theoretical model of reversible adhesion in shape memory surface relief structures and its application in transfer printing. J Mech Phys Solids, 2015, 77: 27-42 CrossRef ADS Google Scholar

[19] Lee H, Um D S, Lee Y. Octopus-inspired smart adhesive pads for transfer printing of semiconducting nanomembranes. Adv Mater, 2016, 28: 7457-7465 CrossRef PubMed Google Scholar

[20] Li J X, Zhang M Y, Wang L M. Design and fabrication of microfluidic mixer from carbonyl iron-PDMS composite membrane. Microfluid Nanofluid, 2011, 10: 919-925 CrossRef Google Scholar

[21] Singh A, Shirolkar M, Limaye M V. A magnetic nano-composite soft polymeric membrane. Microsyst Technol, 2013, 19: 409-418 CrossRef Google Scholar

[22] Abbott J J, Ergeneman O, Kummer M P. Modeling magnetic torque and force for controlled manipulation of soft-magnetic bodies. IEEE Trans Robot, 2007, 23: 1247-1252 CrossRef Google Scholar

[23] Pirmoradi F N, Jackson J K, Burt H M. A magnetically controlled MEMS device for drug delivery: design, fabrication, and testing. Lab Chip, 2011, 11: 3072-3080 CrossRef PubMed Google Scholar

[24] Huang L B, Bai G, Wong M C. Magnetic-assisted noncontact triboelectric nanogenerator converting mechanical energy into electricity and light emissions. Adv Mater, 2016, 28: 2744-2751 CrossRef PubMed Google Scholar

[25] Schomburg W K. Introduction to Microsystem Design. Berlin: Springer, 2011. Google Scholar

[26] Wang X F, Ma Y J, Xue Y G. Collapse of liquid-overfilled strain-isolation substrates in wearable electronics. Int J Solids Struct, 2017, 117: 137-142 CrossRef Google Scholar

  • Figure 1

    (Color online) Electromagnetic-assisted transfer printing stamp with a four prism cavity. (a) The stamp structure; (b) the deformation of stamp during printing; (c) the deformation of stamp during pickup

  • Figure 2

    (Color online) The relationship between maximum displacement of film deformation and electromagnetic driving pressure during printing.(a) The film thickness is different; (b) the side length ratio between the upper and lower films is different; (c) the elastic modulus is different

  • Figure 3

    (Color online) Relationship between the pressure change of the bottom opening cavity and electromagnetic driving pressure during printing for different side length ratios

  • Figure 4

    (Color online) Relationship between the maximum displacement of bottom film and electromagnetic driving pressure during pickup.(a) The film thickness is different; (b) the side length ratio between the upper and lower films is different; (c) the elastic modulus is different

  • Figure 5

    (Color online) Relationship between the pressure change of the bottom opening cavity and electromagnetic driving pressure during pickup for different side length ratios

  • Figure 6

    (Color online) Relationship between the pressure of the bottom opening cavity and electromagnetic driving pressure during transfer printing for different side length ratios