logo

SCIENTIA SINICA Informationis, Volume 48 , Issue 7 : 783-793(2018) https://doi.org/10.1360/N112017-00299

MBSE-based multidisciplinary modeling for designing turbine blade cooling structures

More info
  • ReceivedDec 30, 2017
  • AcceptedFeb 14, 2018
  • PublishedJul 20, 2018

Abstract


References

[1] Montgomery P R. Model-based system integration (MBSI) - key attributes of MBSE from the system integrator's perspective. Procedia Comput Sci, 2013, 16: 313-322 CrossRef Google Scholar

[2] Bjorkman E A, Sarkani S, Mazzuchi T A. Using model-based systems engineering as a framework for improving test and evaluation activities. Syst Engin, 2013, 16: 346-362 CrossRef Google Scholar

[3] Piaszczyk C. Model based systems engineering with department of defense architectural framework. Syst Engin, 2011, 14: 305-326 CrossRef Google Scholar

[4] Fischer P M, Lüdtke D, Lange C. Implementing model-based system engineering for the whole lifecycle of a spacecraft. CEAS Space J, 2017, 9: 351-365 CrossRef ADS Google Scholar

[5] Bachman J T. Obtaining a cross-engineering collaborative environment via transition to a model-based system engineering (MBSE) approach. J Defense Modeling Simul, 2017, : 154851291664688 CrossRef Google Scholar

[6] O'Neil D A, Petty M D. Organizational simulation for model based systems engineering. Procedia Comput Sci, 2013, 16: 323-332 CrossRef Google Scholar

[7] Russell M. Using MBSE to enhance system design decision making. Procedia Comput Sci, 2012, 8: 188-193 CrossRef Google Scholar

[8] Wang C. Integrated aerodynamic design and analysis of turbine blades. Adv Eng Software, 2014, 68: 9-18 CrossRef Google Scholar

[9] Graignic P, Vosgien T, Jankovic M. Complex system simulation: proposition of a MBSE framework for design-analysis integration. Procedia Comput Sci, 2013, 16: 59-68 CrossRef Google Scholar

[10] MacCalman A, Kwak H, McDonald M. Capturing experimental design insights in support of the model-based system engineering approach. Procedia Comput Sci, 2015, 44: 315-324 CrossRef Google Scholar

[11] Herzig S J I, Paredis C J J. A conceptual basis for inconsistency management in model-based systems engineering. In: Proceedings of the 24th Cirp Design Conference, Giovanni Moroni, 2014. 52--57. Google Scholar

[12] Wang C, Xu L. Parameter mapping and data transformation for engineering application integration. Inf Syst Front, 2008, 10: 589-600 CrossRef Google Scholar

[13] Wang C. Insights from developing a multidisciplinary design and analysis environment. Comput Industry, 2014, 65: 786-795 CrossRef Google Scholar

[14] Garg V K, Gaugler R E. Heat transfer in film-cooled turbine blades. In: Proceedings of ASME 1993 International Gas Turbine and Aeroengine Congress and Exposition, Cincinnati, 1993. V002T08A012. Google Scholar

[15] Garg V K, Gaugler R E. Effect of velocity and temperature distribution at the hole exit on film cooling of turbine blades. J Turbomach, 1997, 119: V004T09A002. Google Scholar

[16] Garg V K. Heat transfer on a film-cooled rotating blade using different turbulence models. Int J Heat Mass Transfer, 1999, 42: 789-802 CrossRef Google Scholar

[17] Han J C, Zhang Y M, Lee C P. Augmented heat transfer in square channels with parallel, crossed, and v-shaped angled ribs. J Heat Transfer, 1991, 113: 590-596 CrossRef Google Scholar

[18] Hagari T, Ishida K, Takeishi K I, et al. Investigation on heat transfer characteristics of a cooling channel with dense array of angled rib turbulators. In: Proceedings of ASME Turbo Expo 2012: Turbine Technical Conference and Exposition, Copenhagen, 2012. 387--399. Google Scholar

[19] Laskowski G M, Kopriva J, Michelassi V, et al. Future directions of high fidelity cfd for aerothermal turbomachinery analysis and design. In: Proceedings of the 46th AIAA Fluid Dynamics Conference, Washington, 2015. Google Scholar

[20] Kassab A, Divo E, Heidmann J. BEM/FVM conjugate heat transfer analysis of a three-dimensional film cooled turbine blade. Int Jnl Num Meth HFF, 2003, 13: 581-610 CrossRef Google Scholar